Aestum P150
Minimal form. Considered engineering.
Footprint
150 × 100 mm
Height
1200 mm / 1450 mm
Charger
Single or dual
Mounting
Surface or in-ground
Compact EV Charging Pedestal
150 × 100 mm · Flat H1200 / Roof H1450
The Aestum P150 is a compact stainless-steel EV charging pedestal designed for smaller wall-mounted chargers. Its slim 150 mm profile and carefully considered proportions provide an elegant, space-efficient solution for residential, workplace and commercial parking environments.
Available in Flat and Roof versions, P150 combines architectural simplicity with robust engineering. Main structural components are manufactured from 2–3 mm stainless steel, with a 5 mm anchor plate for rigidity and stability. Precision-finished welds, minimal component gaps and concealed or colour-matched fasteners create a refined appearance from every angle.
Interchangeable, charger-specific adapter plates support selected EV chargers, including compatible single-sided and double-sided configurations. The modular system allows charging equipment to be replaced without necessarily changing the pedestal, provided a suitable adapter is available.
Premium, weather-resistant architectural powder coating in a fine matte texture is available in standard and custom colours. Coordinated accessories, flexible mounting solutions and optional dimensional customisation make P150 adaptable to individual project requirements.
Design
The corpus reads as a single clean volume: hidden fixings, colour-matched hardware and minimal gaps between parts, so the pedestal holds up from every angle rather than only from the front.
Welds are dressed back and the powder coating is a fine-structure matte architectural finish, chosen to sit with the building rather than against it.
Configurations
- Front charger position as standard; a rear position can be added for a dual-charger setup
- Blank rear adapter plate when only one charger is mounted
- Roof on the 1450 mm corpus: none, single, or double, depending on charger count
- Flat upper plate on the 1200 mm corpus
- Optional DIN rail mounting inside the corpus
- Cable holder available as part of the adapter plate
Compatibility
P150 ships with a corpus-matched base adapter plate. The charger-specific interface is a separate, replaceable component — when the charger changes, only that plate changes.
Amina, Charge Amps, Easee, go-e, NexBlue, Tesla, Wallbox and Zaptec
Don’t see your charger? The adapter interface can be developed for any model. Get in touch or start from the configurator.
Technical specifications
| Flat | Roof | |
|---|---|---|
| Width × Depth | 150 × 100 mm | 150 × 100 mm |
| Height | 1200 mm | 1450 mm |
| Top finish | Flat upper plate | Roof, single or double |
- Material: stainless steel
- Thickness: 2–3 mm corpus, 5 mm anchor plate
- Mounting: installation on concrete using an anchor plate, ground installation directly into the ground, or extended ground installation where increased frost protection is required
- Coating: fine-structure architectural powder coating, matte — RAL 7016, RAL 9005, Alesta Oxyde 2, RAL 6009, or a custom RAL
- In-ground parts are supplied in RAL 9005 only
- Cable entry: from below
- Corpus weight: 10.1 kg (Flat) / 12.1 kg (Roof) — corpus only, without adapter plate, top plate and mounting
Downloads & CAD
STEP, DXF and datasheet files for this model are in preparation. Contact us and we will send the files you need for your project.