Aestum P295
Minimal form. Considered engineering.
Footprint
295 × 125 mm
Height
1350 mm / 1450 mm
Charger
Single or dual
Mounting
Surface or in-ground
Versatile EV Charging Pedestal
295 × 125 mm · Flat H1350 / Roof H1450
The Aestum P295 is a versatile stainless-steel EV charging pedestal designed for a broad range of wall-mounted charging stations. Its balanced 295 mm profile combines flexible equipment integration with refined architectural proportions, making it suitable for residential developments, workplaces, hotels and commercial parking facilities.
Available in Flat and Roof versions, P295 features rigid 2-3 mm stainless-steel construction and a robust 5 mm anchor plate. Precisely finished welds, minimal gaps and concealed or colour-matched fasteners reflect Aestum’s attention to premium metal fabrication.
A modular system of interchangeable, charger-specific adapter plates accommodates selected charging units, including compatible installations with two different charger models. Future equipment changes can be supported by replacing the adapter plate where a suitable interface is available.
Premium, weather-resistant architectural powder coating with a fine matte texture is offered in standard and custom colours. Coordinated accessories, flexible mounting options and dimensional customisation allow P295 to adapt to different project requirements while maintaining a consistent architectural appearance.
Design
The corpus reads as a single clean volume: hidden fixings, colour-matched hardware and minimal gaps between parts, so the pedestal holds up from every angle rather than only from the front.
Welds are dressed back and the powder coating is a fine-structure matte architectural finish, chosen to sit with the building rather than against it.
Configurations
- Front charger position as standard; a rear position can be added for a dual-charger setup
- Blank rear adapter plate when only one charger is mounted
- Roof on the 1450 mm corpus: none, single, or double, depending on charger count
- Flat upper plate on the 1350 mm corpus
- Optional DIN rail mounting inside the corpus
- Cable holder available as part of the adapter plate
Compatibility
P295 ships with a corpus-matched base adapter plate. The charger-specific interface is a separate, replaceable component — when the charger changes, only that plate changes.
Alfen, Charge Amps, Easee, Elli, Hager, NexBlue, Smappee and Zaptec
Don’t see your charger? The adapter interface can be developed for any model. Get in touch or start from the configurator.
Technical specifications
| Flat | Roof | |
|---|---|---|
| Width × Depth | 295 × 125 mm | 295 × 125 mm |
| Height | 1350 mm | 1450 mm |
| Top finish | Flat upper plate | Roof, single or double |
- Material: stainless steel
- Thickness: 2–3 mm corpus, 5 mm anchor plate
- Mounting: installation on concrete using an anchor plate, ground installation directly into the ground, or extended ground installation where increased frost protection is required
- Coating: fine-structure architectural powder coating, matte – RAL 7016, RAL 9005, Alesta Oxyde 2, RAL 6009, or a custom RAL
- In-ground parts are supplied in RAL 9005 only
- Cable entry: from below
- Corpus weight: 17.8 kg (Flat) / 19.2 kg (Roof) — corpus only, without adapter plate, top plate and mounting
Downloads & CAD
STEP, DXF and datasheet files for this model are in preparation. Contact us and we will send the files you need for your project.