Aestum P425
Minimal form. Considered engineering.
Footprint
425 × 125 mm
Height
1350 mm / 1450 mm
Charger
Single or dual
Mounting
Surface or in-ground
Wide-format EV Charging Pedestal
425 × 125 mm · Flat H1350 / Roof H1450
The Aestum P425 is a wide-format stainless-steel EV charging pedestal developed for larger wall-mounted charging stations. Its generous 425 mm mounting surface accommodates selected large-format equipment while maintaining refined proportions and a distinctive architectural presence in residential and commercial environments.
Available in Flat and Roof versions, P425 combines substantial mounting capacity with precision-engineered construction. Main structural components use 2–3 mm stainless steel, supported by a 5 mm anchor plate for rigidity and stability. Carefully finished welds, minimal gaps and concealed or colour-matched fasteners ensure a premium appearance from every angle.
Interchangeable, charger-specific adapter plates support selected charging equipment in compatible single-sided or double-sided configurations. The modular design also allows future charger replacements when suitable mounting interfaces are available.
Premium architectural powder coating provides a weather-resistant, fine matte finish in standard or custom colours. Coordinated accessories, flexible installation solutions and optional dimensional customisation make P425 suitable for demanding architectural projects requiring both technical adaptability and visual consistency.
Design
The corpus reads as a single clean volume: hidden fixings, colour-matched hardware and minimal gaps between parts, so the pedestal holds up from every angle rather than only from the front.
Welds are dressed back and the powder coating is a fine-structure matte architectural finish, chosen to sit with the building rather than against it.
Configurations
- Front charger position as standard; a rear position can be added for a dual-charger setup
- Blank rear adapter plate when only one charger is mounted
- Roof on the 1450 mm corpus: none, single, or double, depending on charger count
- Flat upper plate on the 1350 mm corpus
- Optional DIN rail mounting inside the corpus
- Cable holder available as part of the adapter plate
Compatibility
P425 ships with a corpus-matched base adapter plate. The charger-specific interface is a separate, replaceable component — when the charger changes, only that plate changes.
Alfen, Andersen, Charge Amps and Volvo
Don’t see your charger? The adapter interface can be developed for any model. Get in touch or start from the configurator.
Technical specifications
| Flat | Roof | |
|---|---|---|
| Width × Depth | 425 × 125 mm | 425 × 125 mm |
| Height | 1350 mm | 1450 mm |
| Top finish | Flat upper plate | Roof, single or double |
- Material: stainless steel
- Thickness: 2–3 mm corpus, 5 mm anchor plate
- Mounting: installation on concrete using an anchor plate, ground installation directly into the ground, or extended ground installation where increased frost protection is required
- Coating: fine-structure architectural powder coating, matte – RAL 7016, RAL 9005, Alesta Oxyde 2, RAL 6009, or a custom RAL
- In-ground parts are supplied in RAL 9005 only
- Cable entry: from below
- Corpus weight: 21.0 kg (Flat) / 22.8 kg (Roof) — corpus only, without adapter plate, top plate and mounting
Downloads & CAD
STEP, DXF and datasheet files for this model are in preparation. Contact us and we will send the files you need for your project.