EV Charging Pedestals
Every Aestum pedestal is built on the same modular logic: a stainless steel corpus, a replaceable adapter plate for the charger, and a choice of mounting and finish. The system comes in three widths and two heights each, so the pedestal scales to the charger and the site – not the other way around.
| Family | Width × Depth | Height options | Compatible chargers |
|---|---|---|---|
| Aestum P150 | 150 × 100 mm | 1200 mm / 1450 mm | 8 brands, 14 models |
| Aestum P295 | 295 × 125 mm | 1350 mm / 1450 mm | 8 brands, 15 models |
| Aestum P425 | 425 × 125 mm | 1350 mm / 1450 mm | 4 brands, 4 models |
All six models
Three families, each in a Flat and a Roof version. Catalogue only – no prices, no checkout.
Materials
2–3 mm stainless steel corpus, 5 mm anchor plate.
Finish
Fine-structure architectural powder coating in four standard finishes – RAL 7016, RAL 9005, Alesta Oxyde 2 and RAL 6009 – or a custom RAL on request.
Charger interface
A replaceable adapter plate – when the charger changes, only the plate changes.
Mounting
Installation on concrete for an existing foundation, ground installation directly into the ground, or extended ground installation where increased frost protection is required.
Flat versions (1200/1350 mm) are finished with a flat upper plate. Roof versions (1450 mm) carry an integrated roof, sized for one or two chargers depending on how the pedestal is configured.
Beyond EV charging
The same pedestal platform is being developed for other equipment: intercom pedestals, payment terminal stands, inverter stands, e-bike infrastructure and general equipment stands. These are development directions, not products you can order today — nothing on this page depends on them.
If your project needs one of these, get in touch — we will tell you honestly where that type stands.